The maximum recommended length of thermocouples (TCs) used in Kaye validation systems depends on several factors — including thermocouple type, wire gauge, environment, and required measurement accuracy. However, as a general guideline for Kaye systems (such as the Validator AVS or temperature mapping setups), the standard maximum cable length for thermocouples is:
Up to 30 meters (≈100 feet) with proper installation and minimal signal interference.
Longer thermocouple lengths may still operate, but they can be more susceptible to signal degradation, increased electrical noise, and voltage drop. These factors may affect measurement accuracy, particularly in high-resolution validations required in regulated environments (e.g., GMP/FDA).
Key considerations when using longer TCs:
• Use appropriate shielded or twisted-pair thermocouple extension wire.
• Avoid routing alongside high-voltage or EMI-generating equipment.
Kaye offers pre-configured thermocouples in standardized lengths and special lengths upon request.